The beauty of the C5 control series is its simplicity. All the components from the relays to the fuses are located right on the board. This is nothing new, except that the C5 series accomplishes this without having high voltage run through the board. With this unique design, you get the convenience of an all-in-one board with the safety and longevity of low power electronics. This control system is set up for a 120v & 240v power supply. The control come standard with primary and secondary pumps wired for 240v, light is wired for 12v, and all other components (blower, ozone, circulation pump, stereo/aux) is wired for 120v. Voltages of these controls may easily be changed by moving the neutral wires at the power block in the control as needed. (see instruction manual for wiring configuration)
The C5 w/T8-S can operate: 1-2-speed Pump, 1 2-speed Pump & Air Blower, 2 2-speed Pump and 1 2-speed Pump & 1 1-speed Pump
This Control System Can Operate the Following:
1- Pump #1 120v/240v 2 speed
1- Pump #2 120v/240v 2 speed
** or **
1- Pump #2 120/240v 1 speed
** or **
1- Air Blower 120v/240v
1- Ozonator 120v/240v
1- Audio/Aux 120v/240v
1- 12v light
1- Circulation Pump 120v/240v (min 23 GPM)
- Self-Standing Control
- T8-S 6 Button Digital Topside with adapter plate
- 2 Speed 1st Pump Ready / Cord included
- 2 Speed 2nd Pump Ready
- 1 Speed Aux Ready (Pump #3 or Blower)
- Circ. Pump Ready
- 12v Spa Light Ready / Cord included
- Ozone Ready
- Dual voltage Transformer
- Flo-Thru Stainless Steel 5.0kw Heater
- Thermowell for thru wall applications
- 13" Tall
- 19" Wide
- 6" Deep
T8-S Topside Dimensions: 6-3/8" x 3-3/8"
Our Most Advanced Topside Yet!
The new T8 Series Command Centers are our most ambitious and feature-packed topsides we've engineered yet. The T8-S is for designed for spas with single or dual booster pumps, while the T8-X features an extra button to operate an additional booster pump or air blower.
Both of the new T8 Command Centers actually share the exact same hardware. Our Spa-Touch™ switching technology along with advances in our software allow our latest topsides to have the same versatility as our control boxes. This means our OEM customers can stock one topside body, and use different custom decals and software settings to make the same hardware look, feel, and act like distinctly different topsides.
The T8-S and T8-X Command Center are also packed with features above and beyond their predecessors:
- Larger 4-digit alpha-numeric displays
- Built-in clocks for more control over filtration timing
- Easy-to-install design (3-hole installation)
- Reversible display (Display can be rotated to be visible from either inside or outside of the tub)
- Temperature and settings locks (Lock the set temperature, user settings, or both)
- Redesigned, more intuitive interface and menu navigation
The C5 series of controls are one of the industrys first controls to be fully tested and approved under the latest editions of UL testing requirements for the United States, and CSA testing requirements for Canada.
Spa Control Systems should be installed by a licensed electrician, Hot Tub repair technician or individuals with the basic knowledge of electrical safety and knowledge of electronics.