The beauty of the C5 control series is its simplicity. All the components from the relays to the fuses are located right on the board. This is nothing new, except that the C5 series accomplishes this without having high voltage run through the board. With this unique design, you get the convenience of an all-in-one board with the safety and longevity of low power electronics. This control system is set up for a 120v or 240v power supply. The control come standard with primary and secondary pumps wired for 240v, light is wired for 12v, and all other components (blower, ozone, circulation pump, stereo/aux) is wired for 120v. Voltages of these controls may easily be changed by moving the neutral wires at the power block in the control as needed. (see instruction manual for wiring configuration)
This Control System Can Operate the Following:
1- Pump #1 120v/240v 2 speed
1- Pump #2 120v/240v 1 Speed
** and **
1- Pump #3 120v/240v 1 speed
** or **
1- Air Blower 120v/240v
1- Ozonator 120v/240v
1- Audio/Aux 120v/240v
1- 12v light
1- Circulation Pump 120v/240v (Laing, Grundfos or Tiny Might)
- Self-Standing Control
- Choice of T7, T8-S or T8-X Topside with adapter plate
- 2 Speed 1st Pump Ready / Cord included
- 2 Speed 2nd Pump Ready
- 1 Speed Aux Ready (Pump #3 or Blower)
- Circ. Pump Ready ( Laing, Tiny Might or Grundfos)
- 12v Spa Light Ready / Cord included
- Ozone Ready
- Low Flow Stainless Steel Heater
- Thermowell for thru wall applications
- Dual Voltage Transformer
- 13" Tall
- 19" Wide
- 6" Deep
T8-X & T8-S Topside Dimensions: 6-3/8" x 3-3/8"
T7 Topside Dimensions: 5" x 2-1/2"
Your Choice Of Topside Command Centers
The Easiest to Install Topside on the Market
The T7 Command Center is United Spa Control's entry-level topside offering. Its simple interface and compact easy-to-install design have quickly made it a favorite among those looking to upgrade from other/older control systems.
The T7 features our patent-pending Spa-Touch™ switching technology, can operate any possible hardware configuration of a C5 Series electronic control, and also provides basic filtration functions.
Our Most Advanced Topside Yet!
The new T8 Series Command Centers are our most ambitious and feature-packed topsides we've engineered yet. The T8-S is for designed for spas with single or dual booster pumps, while the T8-X features an extra button to operate an additional booster pump or air blower.
Both of the new T8 Command Centers actually share the exact same hardware. Our Spa-Touch™ switching technology along with advances in our software allow our latest topsides to have the same versatility as our control boxes. This means our OEM customers can stock one topside body, and use different custom decals and software settings to make the same hardware look, feel, and act like distinctly different topsides.
The C5 series of controls are one of the industrys first controls to be fully tested and approved under the latest editions of UL testing requirements for the United States, and CSA testing requirements for Canada.
Spa Control Systems should be installed by a licensed electrician, Hot Tub repair technician or individuals with the basic knowledge of electrical safety and knowledge of electronics.